Stand Basic

The packaging print has a simple and clean design. Please first confirm all the parts before using.
Includes the main unit, two C-shaped clamps, three long screws, and two short screws. Please use the corresponding screws depending on your machine.
The T-shaped base can move back and forth, and the joint parts are covered with rubber for safety.
Two highly durable clamps keep the machine in place even while in motion.
Slide the T-shaped base plate to adjust the depth of insertion.
Adjust the angle by folding the stand to your preferred degree. The position will keep itself locked until you bend the body all the way.
[Step 1] Flip your VORZE machine and attach the surface of the stand by aligning the holes and using the screws. The A10 PISTON SA has three screw holes, and the A10 CYCLONE SA +PLUS has two holes for holding the machine in place.
[Step 2] Use the clamps to lock the stand with a table or any other stable figure. Please confirm the body does not wobble.
[Step 3] Adjust the angle and position to your preference. Make sure the screws are fully inserted and locked.
[Step 4] Check to make sure the machine is completely fixed before using it. Now you are ready to experience the fully automatic, luxurious service without your hands!
For example, the A10 CYCLONE SA +PLUS can be held in place as shown in the photo. Please note that the former A10 CYCLONE SA (the non-Plus version) is not compatible.
The packaging print has a simple and clean design. Please first confirm all the parts before using.
Includes the main unit, two C-shaped clamps, three long screws, and two short screws. Please use the corresponding screws depending on your machine.
The T-shaped base can move back and forth, and the joint parts are covered with rubber for safety.
Two highly durable clamps keep the machine in place even while in motion.
Slide the T-shaped base plate to adjust the depth of insertion.
Adjust the angle by folding the stand to your preferred degree. The position will keep itself locked until you bend the body all the way.
[Step 1] Flip your VORZE machine and attach the surface of the stand by aligning the holes and using the screws. The A10 PISTON SA has three screw holes, and the A10 CYCLONE SA +PLUS has two holes for holding the machine in place.
[Step 2] Use the clamps to lock the stand with a table or any other stable figure. Please confirm the body does not wobble.
[Step 3] Adjust the angle and position to your preference. Make sure the screws are fully inserted and locked.
[Step 4] Check to make sure the machine is completely fixed before using it. Now you are ready to experience the fully automatic, luxurious service without your hands!
For example, the A10 CYCLONE SA +PLUS can be held in place as shown in the photo. Please note that the former A10 CYCLONE SA (the non-Plus version) is not compatible.
Item Code: 4680
Packaged Size
Width: 15.2cm(6.0 in.)
Depth: 32.5cm(12.8 in.)
Height: 11.5cm(4.5 in.)
Packaged Weight
1815g(64.0 oz.)
Product Weight
1570g(55.4 oz.)

Safe & Stable Steel Stand
Enjoy your VORZE machines hands-free

The exclusive stand for the A10 CYCLONE SA +PLUS and the A10 PISTON SA. Made of sturdy steel, it provides you a stable and comfortable positioning for your machine.

With the holder keeping the machine in one place, you can browse your computer or smartphone freely! This also enhances your +1D or VR experience.

Two clamps can attach to a wide range of flat surfaces. The supporting base is an excellent accessory for exploring a comfortable position while sitting or standing.

Once the machine is set, you would not have to move your hands at all. Your toy will do the rest- sit back, relax, and enjoy!

Compatible with:
A10 PISTON SA
A10 CYCLONE SA +PLUS
*The stand is not compatible with the A10 CYCLONE SA (former model)

Keywords

Related Products

RENDS Co.,Ltd